AvailableNatural Gas Generators

6.84 MW* Wärtsilä 18V34SG rehabilitation candidate — ES-C

Rating basis: *6.84 MW is 18 × 380 kW/cylinder planning arithmetic, not confirmed electrical output. Historical reported rating: 5.98 MW.

Output voltage: 6,600 V
Frequency: 50 Hz

5,980 kW per unit · Wärtsilä · Spain

Choose used / rehab Save Equipment Request Information

One physical unit, two purchase paths

Used and rehab rows refer to the same equipment. Choose the scope you want us to evaluate; selecting another option changes your request, not the quantity available.

USED / AS-IS

Existing equipment

Existing rating: 5,980 kW per unit
Electrical: 6,600 V · 50 Hz
Planning lead time: 0–2 months*
Recorded hours: 130,884*10,000 since overhaul

Release depends on seller access, agreement, payment, removal and transport arrangements. This is not a ready-to-operate plant commitment.

REHAB OPTION · PROPOSED

OEM rehabilitation scope

Output for screening: 6,840 kW*
Electrical: 50 or 60 Hz* · voltage to be specified
Planning lead time: 6–18 months*
Warranty pathway: Yes* — OEM scope and terms to be agreed
Post-rehab service hours: 0* at the agreed return-to-service baseline

Requested frequency

This work has not been performed. A 60 Hz scope requires new generator ends and OEM engineering. New OEM generator ends and key parts currently carry an approximately 12-month planning lead time, subject to a formal OEM quotation. Site work and engine placement can proceed in parallel where engineering and logistics allow. Voltage, final electrical output, scope, delivery milestone and acceptance tests must be agreed.

* Rating, schedule and hours basis. Proposed output uses the existing listing’s 380 kW-per-cylinder planning arithmetic; it is not an OEM-confirmed electrical rating. The 0–2 and 6–18 month ranges are EnergyEquipment.com planning estimates starting only after the required agreements, payment, access and scope approvals. Inspection findings, engineering, parts, logistics, permits and site work can change both scope and dates. Ask which delivery milestone a proposal covers.

0* does not mean a new engine. It describes the proposed service-hour baseline after the contracted rehabilitation and acceptance process. Retained components keep their lifetime history; commissioning and test hours may accrue. Existing hours are historical readings and may not establish total lifetime hours. 130,884 seller-reported historical hours. Seller reports about 10,000 hours after the last Wärtsilä overhaul; verify records.

Warranty for replaced components and performed work, project-specific performance guarantees and LTSA support are subject to satisfactory inspection and definitive OEM agreements. Retained blocks and crankshafts are not covered by a new-component warranty. The general OEM letter is not approval of these particular assets. Read the rehabilitation pathway ↗

Review selected equipment and scope →

6.84 MW* Wärtsilä 18V34SG rehabilitation candidate — ES-C

Photo 1 of 1Open full size ↗

Spain installation photograph; people removed. This is a representative Spain-package view, not a unit-specific identification photograph or evidence of completed rehabilitation.

Technical review & next steps

OEM information package available on request. Qualified buyers and project participants may request the complete Wärtsilä letter and supporting Q&A dated 23 September 2026. These are general platform statements, not asset certification or a warranty already in force.

Guides open in a new tab.

History, availability and verification

Estimated dispatch: Project schedule
Dispatch conditions: Core release/relocation and commissioned rehabilitation are separate schedules. Confirm OEM lead time for the specific scope.
Fuel and application history: Natural-gas plant service reported.
Maintenance / hours basis: 130,884 seller-reported historical hours. Seller reports about 10,000 hours after the last Wärtsilä overhaul; verify records.
OEM review: OEM-supported rehabilitation candidate. General platform support statement is not specific-asset approval or certification. Inspection and project-specific contracts required. Warranty for replaced parts/work; retained block and crankshaft excluded from new-component warranty. Guarantees and LTSA require definitive scope and terms.
Photograph basis: Spain installation photograph; people removed. This is a representative Spain-package view, not a unit-specific identification photograph or evidence of completed rehabilitation.
Quantity basis: Individual asset; exact included scope subject to agreement.
Availability last checked: 2026-09-22

Also included in: Spain Wärtsilä three-engine package — 17.94 MW legacy / 20.52 MW* rehabilitation basis. The same asset is counted once.

Read about the Wärtsilä 34SG rehabilitation pathway ↗ (opens a new tab)

Delivery options for this equipment

These are alternatives for the same physical equipment, not additional units.

As-is core release — Confirm access, release and logistics
Existing equipment; no commissioned or guaranteed output implied.

OEM rehabilitation — Project-specific schedule to be agreed
Potential acceleration through suitable-core reuse and parallel work. Prior 12–18 month planning ranges are not OEM commitments. Inspection, engineering, parts, permitting and definitive contracts govern.

Included equipment, warranty & delivery

Enclosure included: No
Warranty offered: No
Warranty scope / issuer: Used / as-is scope: no warranty offered. A separate proposed rehabilitation scope may carry negotiated OEM terms.
Public table notes: Overhaul scope and current readings to verify; request service records.

Equipment overview

Additional listing details

Listing Reference: EE-W34-ES-C

Power-generation specifications

Voltage: 6,600 V
Recorded hours*: 130,884* — historical reading; confirm meter date, lifetime basis and overhaul history.

Current inventory

Related equipment

Available

Generator Set

1,750 kW Waukesha P9390GSI natural-gas generator — standby rating

Rating basis: 1,750 kW is the standby rating. Do not use it as a continuous-duty guarantee. A 1,575 kW continuous figure appears in legacy marketing and needs OEM confirmation.

Output voltage: 480Y/277 V · Frequency: 60 Hz

1,750 kW per unit

Immediate

View details →

Available

Generator Set

865 kW Caterpillar G3516C enclosed generator — 480 V, 60 Hz

Rating basis: Continuous nameplate: 865 kW / 1,081 kVA, without fan. Historical equipment; net site output and present condition require verification.

Output voltage: 480 V wye · Frequency: 60 Hz

865 kW per unit

2003 Caterpillar G3516C: 865 kW / 1,081 kVA, 480 V wye, 60 Hz and 1,200 rpm. Continuous nameplate rating without fan. Landfill-gas history; 2021 in-frame overhaul documented. Current hours and condition to verify.

Immediate

View details →

Available

Generator Set

500 kW Waukesha F2895GSIU natural-gas generator

Output voltage: 480Y/277 V · Frequency: 60 Hz

500 kW per unit

Immediate

View details →

AS IS, WHERE IS, WITH ALL FAULTS — unless expressly agreed otherwise in a signed contract.

Descriptions reflect our present understanding from available records and seller information and may be incomplete or inaccurate. EnergyEquipment is a general equipment marketer, not a specialist engineer or the equipment manufacturer. Have a qualified expert for this equipment independently verify identity, condition, ratings, completeness, safety, regulatory compliance and suitability for your application before purchase, installation or operation. Photos and historical hours are not operating tests. To the fullest lawful extent, implied warranties of merchantability and fitness for a particular purpose are disclaimed, subject to the signed sale agreement and applicable law. Buyers must arrange safe inspection, handling, transport, installation and commissioning. Any OEM warranty, performance guarantee or service agreement is separate and applies only as stated in the executed OEM contract. Nothing here excludes fraud or liability that cannot lawfully be excluded; signed transaction terms and applicable law control.